Bolted Bonnet Globe Valve

Product description:

Globe Valves are used in On-Off  or Flow Control applications for the oil and gas as well as chemical process industries. Inherently, Globe Valves exhibit a higher pressure drop than other type of valves, therefore they are used where pressure drop across the valve is not a controlling factor. In Globe valves, the full system pressure applied to the disc is transferred to the valve stem, therefore and especially for large sizes, special attention is given to the design of the valve. Also valve trim requires special design when valves are subjected to high differential pressure throttling service.

  • Design Standard

    ANSI B16.34 | BS 1873 | EN 12516 in Forged or Cast Body. Trim Material to BS 1873 and API 600

  • Product Offering

    Valve Type: OS&Y | Rising Stem

    Body Type: Y type or Angle

    Disc Type: Plug, Needle or Throttling

    Size Range: 2” to 24”

    Pressure Class: 150# | 300# | 600#  (Higher pressure class is available on request)

    Material of construction: Carbon Steel (A105-WCB) | Low alloys (F1-WC1, F11-WC6, F22-WC9) | High alloys (F91-C12A, F92 and Stainless Steels) to Nickel Alloys (Inconel, Monel, Hastelloy, Duplex & super Duplex)

  • Quality

    Materials are 100% European origin. Full trace ability of all components provided with strict application of restamping procedure. Special attention is given to Disc and Seat, normally with Stellite 6 overlay, machined and lapped properly to guarantee tightness. Moreover, the connection between disc and stem is achieved by means of a swiveling coupling and guided.

  • Operation

    Handwheel | Gear Operator | Actuated